EN | HU

Accessories


 

GPS Detector
GPS Detector

RADAR DETECTOR WITH NEARLY
ZERO FALSE ALARMS ?!
The GPS DETECTOR can be connected to an optional Remote Radar Detector unit. The two devices is capable of detecting every actual radar-based speed measurement. After the installation and connection, if the Remote Radar Detector detects radar signals, the GPS Detector gives audio and text alarm regarding the typ of signal. A beep sound indicates the strength of the signal. It goes faster according the strength of the radar signal.

If the Smart Mute function is on, the device gives alarm only when your car speed is over the speed limit you have previously set. Thus, when you are stopped at a crossroad, the nearby supermarket's photocell doors does not cause any false alarm.

Because of the ANTI-ZONE function the GPS700 does not give any alarm on those locations which are stored in the ANTI-ZONE database of the detector. This database contains those places where there are false alarms (e.g. automatic photocell doors of gas stations, etc).

Through the aid of the advanced radar detector sensors, the SMART MUTE, and the ANTI-ZONE function the GPS700 device connected with the radar detector module works with nearly zero false alarms.
GPS Detector

MAIN
FEATURES
  • Detects All the European Radar Bands
  • Hidden Installation
  • Advanced Anti-False Alarm System (Speed-based Mute, Anti-Zone Function)

Selectable Radar Bands &
180° Radar Signal Receiving
  • X BAND: 10.525 GHz ± 50 MHz
  • K BAND: 24.150 GHz ± 100 MHz
  • Ka EURO (narrow) BAND: 34.0 GHz, 34.3 GHz, 34.7 GHz, 35.5 GHz

Anti False Alarm Function
(Smart Mute)
Automatic mute for Radar alarms under the user selected speed. Adjustable between 0 – 90 kph (0 – Smart Mute Off). Default value: 50 kph.

Hidable Installation
Possibility
The Remote Radar Detector can be hid behind plastic bumper.

IMPORTANT
NOTE
The Remote Radar Detector is useless without GPS Detector device, and can only connect to it.
If the anti-zone function is switched on and there is a mobile radar speed measurement in progress at an anti-zone location then the device does not give any alarm..


 

 

GPS Detector
GPS Detector

ADDITIONAL LASER DETECTION
PREPARING FOR ALL THE DANGERS
The GPS DETECTOR can be connected to an optional Remote Laser Detector unit. The two devices is capable of detecting every actual laser-based speed measurement.

Laser gun projects a beam of invisible and very short, narrow infrared light energy pulses, and police is normally targeting front license plate of the car, so it is almost impossible to detect the signal with conventional dash board type of Rader/Laser detector. In this regards, Remote Laser Detector offers a high possibility in detecting laser with the two external laser sensors installed at left and right side of the license plate.
GPS Detector
MAIN
FEATURES
  • Detects All European Laser Speed Measurement Signals - FAMA II, FAMA III, SCS-101, SCS-102, SCS-103, Janoptic, UltraLyte LT 20.20, Stalker LZ1, LTI TruSpeed, TraffiPatrol XR, Riegl, Laveg
  • Wide Angle Laser Detection - Stationary 175°, on the move 110°
  • Waterproof, Easy-to-Install Sensors
  • DSP – Digital Signal Processing
  • GPS Detector connection possibility

Having a great angle of view, the Remote Laser Detector covers every possible threat. The sensors offer a 175° detection in stationary position, and 110° detection on the move.

Warning for
sleeping driving
It is an alarm function to prevent user from a sleeping driving caused by long solo trip. By pressing the multifunctional button short, this alert function starts. This mode makes a small beep tone every 30-60 seconds. User should press the multifunctional button within 3-6 seconds after the small beep tone rings. If the user does not press the multifunctional button, the P/L/M LEDs start blinking with dynamic tone.

TUTORIAL
MODE
The Remote Laser Detector can go to "Tutorial Mode" which is a simulation of Laser alarm just as receiving actual laser signal.

Mute
(IN CASE OF SIGNAL)
ln case the laser signal is detected, P/L/M LEDs are blinking by turn with alarm tone for 5 seconds. The signal can be muted by pressing the multifunctional button. The mute function operates only when receiving laser signal.


Â